A Little Bit of Husker Curb Appeal …

Husker Football is kind of a big deal around here. Okay, that was an understatement: it’s part of our identity. We’ve made a lot of different (adorable) doorhangers, but these two are my personal favorites. Why? There’s just something about chevron and Huskers, right?

A touch more subtle in grey chevron, the message is still clear: Forever a Husker!

Both of these designs were dictated by the customer – and both of them are beautiful! I painted them with your standard acrylic craft paint, then sealed both sides with three coats of matte spray sealer. Just in case you can’t protect them with a storm door, the sealer keeps the moisture out (and the wood underneath from warping!). Β The finishing touch is a simple knotted twine hanger. Rustic perfection. πŸ™‚

Red chevron screams "Huskers!" and we added the perfect bit of silver sparkle on top.

Advertisements

We’ve Been Framed!

I must apologize for the long silence here on the blog. Since we opened our shop last February, things have been busy!! πŸ™‚ Yes, in the best possible way… but busy nonetheless. On the bright side, I have quite the assortment of cute projects to share with you all ~ so let’s get started with picture frames!

Picture frames are one of those things we all need, but hate to spend big money on. Big box stores only carry a few {trendy} styles, and frame shops can be over-the-top if you’re looking for something rustic. Our solution is simple = we build them to suit. Our favorite challenge? Framing stretched canvas! These canvases we framed are 3/4″ thick – which isn’t something that would fit into any garden variety frame. πŸ™‚ Challenge accepted!

A simple barnwood frame makes this winter scene complete.

A simple barnwood frame makes this winter scene complete.

This frame is also made from re-claimed wood, one piece, mitered corners.

This frame is also made from re-claimed wood, one piece, mitered corners.

This is my personal favorite! We built this frame from value pine boards, in three different "layers" and then I chalk painted it cobalt blue with grey on top.

This is my personal favorite! We built this frame from value pine boards, in three different “layers” and then I chalk painted it cobalt blue with grey on top.

A simple two-layer barnwood frame makes this primitive stitchery the perfect wall art for Fall!

A simple two-layer barnwood frame makes this primitive stitchery the perfect wall art for Fall!

Here you can see the detail of my chalk paint finish. Love how the frame melds into the Sea in the painting!

Here you can see the detail of my chalk paint finish. Love how the frame melds into the Sea in the painting!

What do you think? Leave us a comment below! πŸ™‚ We’re back!!

Still sweeping up sawdust,

The Woodworker’s Wife

Giant Rulers — with your name on them.

These are just plain awesome. What could make them better? Personalizing them. Yes. The extra time and effort make such a difference …

Personalized ruler growth chart

 

I shortened the lines by about one inch to make room for the letters, which were sized (on my computer) to be the same height as the numbers. I didn’t want them to dominate completely… although they do really steal the show. In a good way. πŸ™‚ πŸ™‚ Right?

personalized ruler

 

As a side note, I LOVE paint pens. They make this project so easy and convenient. No smearing or smudges from stencils, and good points on my letters and lines. Beautiful.

Brag post has concluded. πŸ™‚

~ The Woodworker’s Wife

 

Giant Ruler Growth Charts!!

It’s no secret that these are making a HUGE appearance on Etsy, Pinterest, etc. I had seen them more than a few times and thought, “Wow, that would be easy,” to be followed by, “EIGHTY DOLLARS FOR THAT??!!” (Yes, I am a sort of cheapskate. This comes with being married a very handy, talented man. He builds.) Β We were then asked to make one for a sister-in-law for Mother’s Day. What a great idea! The perfect chance to try this thing out and see what all the fuss is about.

There are many great tutorials out there on making these, and I will not be writing another one for you here. Seems silly. But I will add that if you use a speed square instead of just a plain ruler when marking, you can bee 100% sure that your ruler lines are perfectly straight, square to the board, and also perfect matching lengths across. Speed square also makes adding the numbers EASY. On my ruler I lined them all up to start at 6.75″ away from the left side edge (where the lines are) and then when you stand up the ruler, they are all straight up and down. Very important.

Image

 

Image

 

Another tip I will share with you: use a paint pen! It’s so much easier and more consistent than using a brush to paint the lines on. Beautiful results, and it’s more natural in your hand than a brush.

ImageAnd — The results! Isn’t it adorable?? I’m in love. We’ve sold several of these in our Adoption Shop over on facebook, and have orders for more! Hooray! If you need one, now you know where to look. πŸ™‚

Image

 

It’s all in a day’s work … πŸ™‚

~ The Woodworker’s Wife

 

 

New Life for Old Table Legs!

Image

 

This is something that isn’t exactly woodworking-rocket-science… but I love to see how things change during the process of “re-finishing.” Any furniture re-finishing snob would lament over the imperfection of the job that we did on these table legs. However, to the average eye, the transformation is pretty remarkable – and the end result is much prettier than old brown paint! See what I mean??

Image

 

In this picture you can see the legs (which are oak, in case you’re wondering) after sanding/stripping, and then re-stained. What a difference! How did we do that?

Step one: I applied a liquid stripper very carefully, outdoors, wearing gloves and using a disposable foam brush. It was just BARELY warm enough outside to do this and it bubbled up the paint a little, but not nearly as much as I was hoping for. After it was completely dry, I moved to

Step two: Sanding it down (using a palm sander) with 50 or 80 grit sandpaper (the really rough stuff!). This will bring the wood back to it’s bare, naked original state. The hardest part is getting in the grooves on these handles – and you really have to do those by hand if you want perfect results. For this project, I didn’t do to those kind of lengths. It’s up to you.

Step three: Re-stain! For these legs I chose a nice brown stain (Minwax, “Early American”) and put it on liberally. Let it sit for about 10 minutes if you want the color really dark and rich. The longer stain sits, the darker it becomes. After those minutes are up, wipe off the excess and admire the wood grain!!

It’s amazing how stain can bring out all the beautiful little details in the wood ~ like nothing else can. Check it out!!

 

Image

 

You might be thinking now, “Hey, that looks familiar…” and you’d be right. After this process, these table legs became the handles on my barn wood tool caddy! Now THAT’s what I call re-purposing. Something old into something new … yeah, you get the point.

Have you done any re-finishing projects?

 

~ The Woodworker’s Wife

Barn wood tool caddy show-off ….

So this might just be a shameless brag post, but I had to share. πŸ™‚ Last Winter I made a few of these caddys and they were quick, easy, rewarding and very useful! I have three of them, one for paint supplies, one for extra paper plans and drawings, and one that just looks pretty upstairs. Β There are endless uses for these guys … and they are so easy to build!Β 

Here they are, in all of their glory. They were constructed from local barn wood, salvaged by my husband and I just a few months ago. I took 80 grit sandpaper and hit all the boards on both sides to clean some of the dirt and grime off the surface. A light touch did the trick – without taking all of that beautiful, grey, old weathered look off the wood. The table legs were cleaned and prepped also – and that will be a separate post. πŸ™‚Β 

Once the wood is ready, I simply cut the bottom and sides down to the same length (checking the width, but since these were salvaged boards, I didn’t want to cut any exposed edges). The larger caddy is 16″ long, and the sides I cut somewhere between 12 and 13″ high, cutting a 45 degree angle off of each corner for a more rustic look. Then fire up the nail gun and go to town! πŸ™‚Β 

The handles were pre-drilled and then glued and screwed in from the outside of the caddy. Very strong and sturdy – our football-player-sized brother sat on it and it survived. πŸ™‚ Seriously.Β 

But what you really want are the pictures… so here they are! This set of two were custom made for my sister-in-law. Doesn’t she have good taste?Β 

Image

ImageImage

Image

Β 

Don’t you just love how OLD they look? We rescued those table legs out of grandma’s basement and gave them new life. There’s nothing more satisfying than giving something beautiful a brand new life!Β 

~ The Woodworker’s WifeΒ 

DIY Repurposed , UPcycled frames into chalkboards!

Image

 

 

I rescued these from Goodwill on a rainy day for $7.99 per frame. They were dirty, dingy, missing the glass inside, and well, not something I would hang on my wall … but I saw some potential! What if they were chalkboards? What if they were white frames with distressed colors peeking through?

So I took out the rusty little nails and the old dingy “artwork” and sanded down the frames a bit. After wiping off the gross nasty dirt that came off … I painted them each a different color – one with “Pistachio Mint,” {Americana Acrylic Paints} and the other “Bimini Blue,” {Apple Barrel Acrylic Paints}. After that was dry, I coated them with basic white acrylic paint, lightly brushing over the high points of the frame. As you can see, the details on these old frames really lend themselves to distressing! πŸ™‚

Using 120 grit sand paper, I took it in my hand and just lightly sanded over the surface of the frame, the edges… as you can see, what’s left is some of the gold peeking through (original paint), and the colors are left in the grooves. So pretty!! I finished with a clear, water-based poly so that it would be dry in a mere two hours (and not smell so bad). I LOVE the results.

Image

 

Image

 

Image

 

See the pretty teal peeking through? I love how it brings out the beauty of the wooden frame!

If you’ve read my post on making chalkboards, you know how seriously I take the chalkboard-painting process. πŸ™‚ In case you missed it, go read it now! You’ll love making these things!! πŸ™‚ Β We used 1/4″ mdf for these chalkboards, cut to fit the frame (about 10″x13″). I used a fine foam roller to keep the texture on the chalkboards nice and smooth and even. Mdf is a dream to paint! Just make sure to finish the back so that it’s water proof. I used Rustoleum weatherproof paint on the back to keep all my hard work safe.

So… here you have it — my BEFORE and AFTER.

 

Image

 

Keep hunting the thrift stores for wonderful finds like these!! Have you re-purposed anything lately?

 

~ The Woodworker’s Wife

 

{None of the products in this post were sponsored or influenced my opinion in any way. Just sharing what I use and what works!}