This is something that isn’t exactly woodworking-rocket-science… but I love to see how things change during the process of “re-finishing.” Any furniture re-finishing snob would lament over the imperfection of the job that we did on these table legs. However, to the average eye, the transformation is pretty remarkable – and the end result is much prettier than old brown paint! See what I mean??
In this picture you can see the legs (which are oak, in case you’re wondering) after sanding/stripping, and then re-stained. What a difference! How did we do that?
Step one: I applied a liquid stripper very carefully, outdoors, wearing gloves and using a disposable foam brush. It was just BARELY warm enough outside to do this and it bubbled up the paint a little, but not nearly as much as I was hoping for. After it was completely dry, I moved to
Step two: Sanding it down (using a palm sander) with 50 or 80 grit sandpaper (the really rough stuff!). This will bring the wood back to it’s bare, naked original state. The hardest part is getting in the grooves on these handles – and you really have to do those by hand if you want perfect results. For this project, I didn’t do to those kind of lengths. It’s up to you.
Step three: Re-stain! For these legs I chose a nice brown stain (Minwax, “Early American”) and put it on liberally. Let it sit for about 10 minutes if you want the color really dark and rich. The longer stain sits, the darker it becomes. After those minutes are up, wipe off the excess and admire the wood grain!!
It’s amazing how stain can bring out all the beautiful little details in the wood ~ like nothing else can. Check it out!!
You might be thinking now, “Hey, that looks familiar…” and you’d be right. After this process, these table legs became the handles on my barn wood tool caddy! Now THAT’s what I call re-purposing. Something old into something new … yeah, you get the point.
Have you done any re-finishing projects?
~ The Woodworker’s Wife